Today we will talk about this TV unit, after that we will know which things you have to keep in mind
if you plan for such a TV unit and after that I will also tell you the total cost of the TV unit
with complete breakup.,
so let's start
The size of this TV unit is 8 * 7 feet. Its height is 7 feet
box is with storage in the bottom, panel is given in the centre on which TV can be fixed
small box is also given on all four sides, CNC cutting design has been given in the middle of the box on both sides
It is made of CNC cutting MDF, different designs are made by cutting on MDF wood
after that Deco Paint is done on it
There is a provision of spot light inside CNC cutting design and a rope light has been provided behind the panel
due to this the TV unit is looking very modern and attractive
by the way, what is your opinion in the comment section?
the centre panel is designed in such a way that 55 inch or bigger TV can be fixed comfortably.
PVC Laminates have been used in the TV unit, 710 grade plywood has been used to make the box.
Now let's know what things you have to keep in mind before making such a TV unit.
The spot light point has to be planned in advance so that proper installation of light can be done.
MDF is used for CNC Design, for which MDF is used from 10 mm to 12 mm
The measurement of CNC design, take 1 inch more than the size because if the length is more
then it can be cut lightly from all the four sizes, but if the size is small then it can be useless
so keep this in mind
Generally I do not recommend using MDF for interior design but for CNC cutting
MDF is considered to be the most preferred board, so you should use MDF for this because
it is not easy to get this design on plywood because it is strong
But if there is a chance of getting water etc., then you should avoid
The MDF may get damaged over time if exposed to water. So just these few things that you have to keep in mind
Now let's talk about the budget
First Electrical cost, then CNC Design cost then Wood work cost
Electrical cost - 10 light points provisioned and each cost 400 rs so total cost is 10 *400 = 4000
200 per point of LED spot light so total cost 10 *200 = 2000
and rope light cost which is given inside panel is 400 rs
so total electrical cost is 6400 rs
5000 for CNC Design and Deco Paint cost - 4000 and wood work cost = 30000
so Total budget - 45400 rs
How did you like this TV unit, will definitely tell in the comment section
If you have any question in your mind, you can also ask in the comment section.
That's all in this post, if you like this TV unit, then share the post and. Thanks you